How to use Debian’s reportbug with Evolution

This is mostly a note pad for myself with quick instructions about how to create a bug report for Debian and edit it and send it with Evolution.

reportbug is Debian’s tool for sending bug reports. Although it is a nice tool that automatizes most of this process, it only supports some email clients for the final steps of editing the message (and send it). Among these programs is not Evolution, my preferred mail application.

Fortunately, there is a way to work around this problem. The way of doing it is by placing the mbox file created by reportbug into Evolution’s local Drafts folder. As we can read on its manual, Evolution stores the user’s data files at $HOME/.local/share/evolution.

By doing a simple check around that path, we can conclude the following solution: first, we generate the bug report and place the output in the proper location, as in this command:

After finishing walking through reportbug‘s wizard, the only action left is launching Evolution and opening a new email that has appeared in the local Drafts folder, finish editing it (attaching files, etc.) and send it.

Extract, cut, join and merge audio and video streams

This is mostly a note pad for myself with quick instructions about how to extract, cut, join and merge audio and video streams.

In Igalia we often hold meetings with several parties attending remotely. The easy setting of such meetings usually involve a shared desktop through VNC and a SIP call in a multi user room hold in our Asterisk installation.

When some of my Igalian mates cannot attend we may want to record the meeting so they can play it later. Fortunately, GNOME Shell provides integrated desktop recording out of the box and we have Asterisk set to record automatically our calls in specific multi user rooms.

So, all what it is left after a meeting is just to get both files, edit them slightly and sync them to merge them in a single multimedia container.

Usually, I would use Kdenlive in my video editing tasks. However, Kdenlive doesn’t support “video edition” without re-encoding and I would really like not to re-encode the whole stuff. Specially, the video stream. Therefore, I still will use Kdenlive for the task of syncing both streams and looking for the cutting points for both, the video and the audio file.

For most of this “without re-encoding” actions I will use the great avconv tool.

First, I will cut the video in the time 00:07:45 as starting point and 02:05:20 as ending point:

This command basically demuxes the WebM container and extract the video stream between those two points to mux it again into a Matroska container.

Then, I will cut the audio in the starting point 00:02:13 and ending point 01:59:48. For editing OGG files we can use Oggscissors or OGG Video Tools’ oggCut .

You won’t find Oggscissors in Debian (the distribution I use). Therefore, you will have to download it and install pyvorbis and pyogg and, maybe, modify slightly the script to use the proper python interpreter. You can install the missing packages like this:

Once with Oggscissors working, we can get the interesting audio chunk like:

or, with oggCut, like:

It may happen that we actually want to extract the audio from another video file. This has happened to us, eventually, when wanting to use the audio from a synced file into another video with higher quality.

We will also use avconv for this:

It may also happen that we want to join a couple of OGG files since our SIP conf-calls sometimes have hiccups. With Oggscissors this will be done as follows:

With oggCat this will be done like:

Finally, we will merge or mux the resulting video and audio files into a single media container. Again, with avconv this will be done like:

Following the examples above this will result in a Matroska video file which contains a VP8 video stream and a Vorbis audio stream.

Hope you find this useful!

Switching between nouveau and the nVIDIA proprietary OpenGL driver in (Debian) GNU/Linux

So lately I’ve been devoting my time in Igalia around the GNU/Linux graphics stack focusing, more specifically, in Mesa, the most popular open-source implementation of the OpenGL specification.

When working in Mesa and piglit, its testing suite, quite often you would like to compare the results obtained when running a specific OpenGL code with one driver or another.

In the case of nVIDIA graphic cards we have the chance of comparing the default open source driver provided by Mesa, nouveau, or the proprietary driver provided by nVIDIA. For installing the nVIDIA driver you will have to run something like:

Changing from one driver to another involves several steps so I decided to create a dirty script for helping with this.

The actions done by this script are:

  1. Instruct your X Server to use the adequate X driver.
    These instructions apply to the X.org server only.
    When using the default nouveau driver in Debian, the X.org server is able to configure itself automatically. However, when using the nVIDIA driver you most probably will have to instruct the proper settings to X.org.
    nVIDIA provides the package nvidia-xconfig. This package provides a tool of the same name that will generate a X.org configuration file suitable to work with the nVIDIA X driver:

    I have embedded this generated file into the provided custom script since it is suitable for my system:

    I would recommend you to substitute this with another configuration file generated with nvidia-xconfig on your system.

  2. Select the proper GLX library.
    Fortunately, Debian provides the alternatives mechanism to select between one or the other.

  3. Black list the module we don’t want the Linux kernel to load on start up.
    Again, in Debian, the nVIDIA driver package installs the file /etc/nvidia/nvidia-blacklists-nouveau.conf that is linked, then, from /etc/modprobe.d/nvidia-blacklists-nouveau.conf instructing that the open source nouveau kernel driver for the graphic card should be avoided.
    When selecting nouveau, this script removes the soft link creating a new file which, instead of black listing nouveau’s driver, does it for the nVIDIA proprietary one:

    When selecting nVIDIA, the previous file is removed and the soft link is restored.

  4. Re-generate the image used in the inital booting.
    This will ensure that we are using the proper kernel driver from the beginning of the booting of the system:

With these actions you will be already able to switch your running graphic driver.

You will switch to nouveau with:

And to the nVIDIA proprietary driver with:

It is recommended to reboot the system although theoretically you could unload the kernel driver and restart the X.org server. The reason is that it has been reported that unloading the nVIDIA kernel driver and loading a different one is not always working correctly.

I hope this will be helpful for your hacking time!

Side tabs in Empathy

Going quickly to the interesting part.

If you happen to use Ubuntu Saucy 13.10 and would like to have side tabs in Empathy, just write the following commands:


$ sudo add-apt-repository ppa:tanty/ppa

If, in addition to be using Ubuntu Saucy 13.10 you are using also GNOME3 Team’s PPA, you will need to run the following command:


$ sudo add-apt-repository ppa:tanty/gnome3

Finally, update your repositories, upgrade empathy and set the proper configuration:


$ sudo apt-get update && sudo apt-get install empathy
...
$ gsettings set org.gnome.Empathy.conversation tab-position 'left'

After this, you can just open the chat window in a new Empathy running instance and you should see something like this:

Side tabs in Empathy by ::Tanty::
Side tabs in Empathy, a screenshot by ::Tanty:: on Flickr.

Motivation

I’m a long time user of Jabber and Empathy. I use it for every day’s communications and, in Igalia, we have several internal rooms in which we coordinate ourselves. Because of the amount of rooms in which I am as a regular basis, Empathy’s chat window is unable to display the tabs of each of them in the top bar of the conversations.

This forces me either to split in different windows or just to navigate among them every now and then to check if there is any interesting update. Quite annoying 🙂 .

Some time ago, #586145 was filed requesting the possibility of having the chat room tabs not only displayed on top but also in other positions, specially in the side.

Hence, I decided to take the existing patch and perform some small changes to the work done by Neil Roberts in order to be able to have these side tabs.

With this new feature, you can change the position of the tabs just by changing a setting, as the position property is bond to it. If you want to set the tabs at ‘top’, ‘left’, ‘bottom’ or ‘right’, you should run, respectively:


$ gsettings set org.gnome.Empathy.conversation tab-position 'top'
$ gsettings set org.gnome.Empathy.conversation tab-position 'left'
$ gsettings set org.gnome.Empathy.conversation tab-position 'bottom'
$ gsettings set org.gnome.Empathy.conversation tab-position 'right'

Now, I’ve uploaded a new version of the patch and I’m waiting to pass the review process and land it.

This is a tiny enhancement on top of the great work that several GNOME developers have done in Empathy over the years. However, it is really making a difference to me so I’ve decided to share it quickly in case someone else would find it useful since it will take a while to come into the main distributions. Hence, I’ve ported it to the Empathy version I’m using in the Ubuntu Saucy 13.10 running on my desktop.

If you want to give it a try, just follow the instructions I’ve written at the beginning of this post.

Final notes

In addition to Empathy, you will be able to find in my PPAs:

  • A working (and custom) version of the faulty official icecc package with patches fixing LP#1182491.
  • A custom version of webkitgtk with patches fixing WK#115650 which will speed up opening new tabs in Web.

Enjoy!

Update: I’ve added recently empathy patched versions also for Ubuntu Trusty 14.04.

Update 2: I’ve added recently empathy patched versions also for Ubuntu Utopic 14.10.

Quickly publishing in your Ubuntu PPA

This is more a note pad for myself with quick instructions about how to upload a (usually patched) package to my own PPAs.

Patching an existing package

First thing is downloading the sources of the package from the repository that is providing the buggy binary package installed in my system.

For example, when patching webkitgtk, if my installed package is from a vanilla Ubuntu release, I only have to check that I have the source from the official Ubuntu repositories. However, if my installed package is from another PPA, I will have to check that I have the source from it or, if not, I would have to download the needed packages manually. Let’s assume my installed package is coming from the GNOME3 Team Ubuntu PPA:

Just in case, something I like to do is to add the code from the downloaded package to a local git:

Then, it is time to apply the needed changes to the source code. This is the reason why git comes handy, in case these changes are not trivial and they need actually some more work. When we are done with the changes, we have to add them to the debian package as an additional patch to the original source. We use dpkg-source for this:

We enter the patch name and the description of the changes:

Finally, we modify the release information adding or increasing the non-maintainer digit. For example, in this case the downloaded source version was 2.3.2-1ubuntu6~saucy1, so I’m setting 2.3.2-1ubuntu6~saucy1.1. Also, remember to provide the proper distribution name or to modify it when writing down the log of the changes. In this case, we are using saucy. Check also that you are using the proper email for the log. In my PPAs I use my personal one:

With this, we are done modifying the source of the package.

Importing patch alternative

Maybe this is a cleaner and quicker way of patching the downloaded sources. Instead of modifying the sources and running dpkg-source –commit, we can just import an existent patch that would apply on the source code.

To do this, we just have to run:

This will also work in Debian packages for which version dpkg-source –commit won’t work. In addition, is the quickest way to reuse a patch from a package in a previous Ubuntu distribution into a newer one, for example.

From here we will retake the same steps than above to add the release information.

Building the source package

We just have to take into account that, when you have more than one GPG key available, the signature of the package will fail during the process, as in:

Hence, you have to provide the key id to use in the -k parameter.

In addition, if the sources used for the package are not coming from one of the official Ubuntu repositories you will need to provide also the sources when uploading to the PPA. For this, you have to pass the -sa parameter. For the used example, as we are taking the source from the GNOME3 Team Ubuntu PPA, we will pass this parameter as in:

While for other packages which we modify directly from the sources of the official packages provided by Ubuntu, we just use:

Optional local build

A local build is not really necessary but it will tell you if your applied changes are breaking or not the compilation of the package.

The best way of doing a trustful local build is using pbuilder.

When using pbuilder we have to be sure that we are using the proper packages not only from Ubuntu’s official repositories but also from the PPAs our target PPA depends on and also our own PPA itself.

I’ve already created the tarballs with the chroot distributions for my own PPAs. However, in order to show an example, we would be using a line like the following one for creating a new tarball for my gnome3 PPA which depends in my ppa PPA and also in GNOME3 Team’s gnome3 PPA:

I make use of the <path_to_base_pbuilder> because by default it is all done at /var and I do not always have enough space there.

Once created, and following our example, we would be building our package for the target gnome3 PPA as follows:

Now, it is just a matter of waiting and checking the results.

Uploading to your PPA

The final step is uploading the package with the new changes to your PPA.

I actually have one sandbox PPA per each stable PPA. These PPAs are not intended for the general users but for being able to play with the changes until I feel they are stable enough to be published in the stable PPAs. Hence, I have 4 PPAs:

  • ppa: Where I keep changes from official Ubuntu packages that are useful to me.
  • ppa-next: Not intended for general users. Where I keep unstable packages with the changes that I will move to the ppa one once I feel they are stable enough.
  • gnome3: Where I keep changes on packages which source has been obtained from the GNOME3 Team PPA.
  • gnome3-next: Not intended for general users. Where I keep unstable packages with the changes that I will move to the gnome3 one once I feel they are stable enough.

With this, during the first cycles of development I will be uploading the changes to my unstable PPAs before uploading them to the stables. For this example, I would be uploading first to the gnome3-next one:

Once I’m happy enough I would be uploading the changes to the stable PPA:

The -f flag is avoid the error that is triggered when there is already a “log” file from a previous upload with dput of a certain “.changes” package.

With this, you only have to wait for the package to be built on the PPA bots, upload your repositories and upgrade:

Enjoy your newly patched package!

What’s up with the scrollbar?

First, it was Ubuntu which innovated in the scrollbars creating a nice overlay, but making them unusable for those like me using a track pointer or a mouse without wheel.

Now, with GTK-3.0, the scrollbars have also changed their default behavior and when clicking above or below, the scrollbar moves immediately to that position.

Again, this makes it unusable unless you have a wheel in your mouse or have another fancy way of scrolling, like a touch pad.

I’m nowadays a proud owner of a Lenovo X220 and I use the track pointer included disabling the annoying touch pad thanks to the Touchpad Indicator GNOME extension. I say “annoying” because, when using the track pointer, I tend to touch every now and the the touch pad with unpredictable results.

So, with the new behavior and without the possibility of scrolling with a mouse wheel or a touch pad, viewports with a long extension are really difficult to browse with the pointer. This is the case for several of my mail folders in Evolution. As a result, I was getting nuts.

Therefore, I wanted to go back to the old behavior. This is: when clicking above the bar it would mean “PgUp” and when clicking below “PgDown”.

Fortunately, GTK-3.0 provides a way of tuning this. You have to add an option to its “settings.ini” file. If you want to apply it system wide, you will do it in “/etc/gtk-3.0/settings.ini” while if you want only to affect an user, you will do it in “~/.config/gtk-3.0/settings.ini”.

This is how it looks like:

Hope this helps to someone else! 🙂

Introducing Facerecognition Resetter Plugin for the Nokia N9

As my mate Simón was writing short time ago in his post Announcing the Gallery Tilt Shift plugin for the Nokia N9, we got published at Igalia some plugins for enhancing the experience of the built-in Gallery application in the N9/N950 through the Nokia Store: Enlarge & Shrink Plugin, Gallery Tilt Shift Plugin, and Facerecognition Resetter Plugin.

The Enlarge & Shrink Plugin is a filter developed by Antía Puentes for the built-in Gallery application which applies a radial distortion to a picture featuring an enlarge or shrink effect (also known as punch or pinch).

The Gallery Tilt Shift Plugin is a filter developed by Simón Pena for the built-in Gallery application which makes a picture look like a miniature.

Finally, Facerecognition Resetter Plugin was developed by me. It is a add-on for the built-in Gallery application which is not a real filter for the pictures. Instead, it is just a way of forcing the deletion or un/protection of the face recognition database through its usage from Gallery. The main reason for doing this is a well known bug in the face recognition feature.

If you are experiencing that the the N9 is not recognizing faces any more or it is not giving any more suggestions just install Facerecognition Resetter Plugin and click on the “Protect” button. You want to do this even if you are not suffering this problem since this will prevent it from appearing in the future.

BTW, comments and reviews in the Nokia Store will be welcomed 😀

But, specifically, why would we want to reset or un/protect the face recognition database? Or, actually, what the heck is that face recognition database? Let’s get to the beginning.

When Nokia released the PR1.2 update for the Harmattan platform they included a new feature which made the N9 to be the first smartphone with integrated automated face recognition.

This feature, when activated, let the Gallery or Camera application to automatically recognize faces on the pictures stored in the device, showing a white bubble with a question mark on top of the region detected as a face.

Clicking on such bubble you would be able to select one of your contacts to be assigned as the detected face.

The algorithm would be even learning as the user selected and assigned faces to contacts so at some point it would be also suggesting the proper contact for the detected faces. The user, then, would only have to double tap on the suggestion bubble to confirm such contact.

Everything seemed great but after a while, some users started to complain that this feature eventually stopped working. Either it was not suggesting anyone, when there were people tagged in a big number of pictures or it was just not recognizing faces any more.

As with any software, the face recognition feature contains bugs and this problem was the consequence of one that Nokia has not yet fixed to the current date.

The technical explanation is that the algorithm that performs the face detection relies in SQLite to store its learning parameters and contacts. This database is located at:

This file and its directory are protected through the usage of the AEGIS “powered” gallerycoredata-user user and gallerycoredata-users group. Also, the file permissions mask for them are 070 in the case of the directory and 060 in the case of the file.

When doing transactions to the database file the SQLite driver may create some temporal files as the journal one, to be able to recover the database under disaster. This journal file gets the UID and GID of the running process and the permissions from a combination of the permissions of the original database file and the running process’ umask. As a consequence, the journal file usually has the permissions mask 040.

While using the Camera or Gallery application the SQLite file is open. Whether a disaster may happen, although we hold the journal file, the owner of that file is not able to read it. Hence, the SQLite database remains useless for the processes with the same UID than the owner of the journal file, even when they belong to the same group than that file.

What it happen afterwards is that the SQLite database remained waiting to be “recovered” using the journal file but as the journal could not be read, the face recognition algorithm could not provide the learned information and suggest contacts any more. The solution for this would have been as easy as to change the file permissions of the journal file but this is not even possible for the root user since only the gallerycore-user user and those belonging to the gallerycore-users group were allowed through AEGIS to read and change the files on the parent directory of the database file.

Hence, the only way of being able to do a hack that would solve this problem was that the actual application doing such changes would be either Gallery or Camera. Fortunately, Gallery had the possibility of being extended through plugins and that’s the reason why Facerecognition Resetter is such.

Following, you can watch a video featuring an usage introduction tutorial and a detailed explanation of its usage below it.

The plugin shows 3 buttons for its corresponding actions:

  • Reset the database: As simple as that. It will delete the directory and files containing all the information gathered through the face recognition algorithm. From that on, the face recognition feature will start to work again but the learning gotten previously and powering the suggestions will be lost.
  • Protect the database: This will correct the permissions of the directories and files containing all the information gathered through the face recognition algorithm. From that on, the face recognition feature will start to work again and the suggestions would have the learning gotten previously. The problem will not show up in the future ever again but the database will remain protected and only usable through Gallery and Camera (or any other application with the proper AEGIS tokens).
  • Unprotect the database: This will correct the permissions of the directories and files containing all the information gathered through the face recognition algorithm. From that on, the face recognition feature will start to work again and the suggestions would have the learning gotten previously. The problem will not show up in the future ever again and the database will be available to any other application that would like to make use of it.

The permissions get corrected when un/protecting since the plugin sets the SGID bit to the parent directory of the database file so any other files created under it will belong to the same group than the directory and not to the GID of the running process that created that file. Also, the database will have now the 660 mask so any temporal file created by the SQLite drive will attempt to keep the same mask.

And with this, we can keep enjoying the usage of the face recognition feature of the N9 and go to celebrate it with some beers!!! 😀

This and the other plugins are Open Source, so you can go to their page at GitHub: Enlarge & Shrink, Gallery Tilt Shift and Facerecognition Resetter

Also, don’t forget to take a look at all the applications published by Igalia at the Nokia Store

Download Facerecognition Resetter Plugin from Nokia Store

Igalia wallpapers

Igalia wallpaper for the N9/N950

“Igalia wallpaper for the N9/N950”

Some weeks ago we decided to do an upgrade to the information that we are showing in our Igalia’s website. Due to these changes, I had the chance to play a little bit with some new graphic material that was used in the upgrade.

As a result, I’ve created based on Opsou’s Pedro Figueras original idea some different wallpapers for most of my GNU/Linux powered devices.

Just click in the images and go to download them at their original resolution.

I’ve uploaded it to a public Git repository which you can download with the following command:

4x3 Igalia wallpaper

“4×3 Igalia wallpaper”

16x9 Igalia wallpaper

“16×9 Igalia wallpaper”

Igalia wallpaper for the N900/N810/N800/N770

“Igalia wallpaper for the N900/N810/N800/N770”

Attending the Automotive Linux Summit 2012

Next Wednesday I will be attending the Automotive Linux Summit 2012.

It will be a good time to meet the key people pushing the usage of Linux in the automotive arena and I hope to have a great time at the Heritage Motor Centre in Warwickshire.

If you happen to attend the event and want to have a good chat with an Igalian about any of the technologies in which we are strongly involved: WebKit, rendering, compilers, Grilo, GStreamer, the kernel, Qemu, Yocto, OSTree, Skeltrack, OpenCV, a11y, Qt, Gtk+ and so on. Just poke me whenever you see me around 😉

NSLU2, Grilo and UPnP in Ubuntu’s GNOME

Going quickly to the “ham”, if you are running Ubuntu Precise on your machine and want to have Grilo support including its UPnP plugin in totem and rhythmbox just add Grilo Team‘s PPA:

Then, pull down the latest list of software including the PPA you just added:

Install the needed packages and upgrate any old one:

That’s it! Enjoy your Grilo powered totem and rhythmbox!

Now, the long boring story 😉

Last weekend I found some time to resurrect my dear NSLU2 which passed away some months ago when its attached USB hard drive started failing. I have reports from several USB hard drives dying while being attached to a NSLU2 so I may have to take a look to that at some point, but that would be in another moment.

Thanks to good Martin Michlmayr I only had to follow quickly his installation guide and I could have the Debian Squeeze firmware image he provides running smoothly in a matter of minutes.

Afterwards, I followed the counsels of Juan and Mario to tweak my Slug.

The customization to highlight was adding a MediaTomb server since one of the main features that I wanted to add to my Slug was the possibility of serving audio and video through UPnP.

Everything seemed in place but, when I checked in my desktop running Ubuntu Precise how to access my music from rhythmbox and my videos from totem I had a sad surprise. None of them have UPnP support and, what is worse, none of them have Grilo support out of the box in Precise. And I say worse because, among other plugins, Grilo already provides UPnP support and AFAIK, totem and rhythmbox have upstream Grilo plugins for quite some time already.

So, what was the problem? Why weren’t they in Precise?

Well, in the case of rhythmbox it seems just a small mistake in the debian packaging, as it is pointed in this report in Launchpad’s bug 973295. Astonishingly, it has not yet been fixed!

Hence, I downloaded the sources for the precise-proposed rhythmbox’s package and I did the proper changes and uploaded it to the Grilo Team PPA.

Rhythmbox and Grilo 0.1

“Rhythmbox and Grilo 0.1”

In the case of totem what happened was that Grilo’s plugin was removed as for the version that was packaged for Precise, in the road to add a new and better plugin for Grilo 0.2. Which is what it is in totem upstream nowadays.

Therefore, I re-took the old patch for totem’s Grilo 0.1 plugin in GNOME’s bug 628648, downloaded the sources for the precise-proposed totem’s package, patched and uploaded it to the Grilo Team PPA.

Totem and Grilo 0.1

“Totem and Grilo 0.1”

In the path for all these changes I joint the Grilo Team at gitorious and made also some changes to its packaging.

Now I can enjoy my UPnP served music and videos from my favorite applications in GNOME!!!

Hopefully, for the next Ubuntu’s release we will have Grilo 0.2 already integrated and totem will come with its plugin out of the box. By now, rhythmbox’s Grilo plugin has yet not been migrated.

Grilo 0.2 is a great library for accessing the media content from several resources. Juan, the Grilo master, has been working in Igalia writing a new, clean, easily extendable and powerful API that is ready for use and which keeps enhancing everyday. However, Grilo’s adoption is coming surprisingly slow. Out of GNOME other projects have shown quite some interest as it was the case of Media Explorer, but in GNOME I only know of its support by the 0.2 version in totem. Anyone willing to bring the power of Grilo to Music, rhythmbox, banshee and the like? 😀

Update: It seems I rushed too much since Jonathan Matthew migrated rhythmbox Grilo plugin to 0.2 pretty recently. Thanks Matthew!